CALL US! (647) 367-8721 or (403) 713-0177
**FREE Shipping!**
AbsoluteHID is now offering free shipping anywhere in Canada. Look for our new super saver shipping option at checkout!
2014 - 2020 Volkswagen Jetta
2014, 2015, 2016, 2017, 2018 and 2019 come with two headlight, options, factory halogens and factory HID. Factory halogen Jettas use an H7 bulb for lowbeam, H7 bulb for highbeam and H8 bulb for fogs. The lowbeams and foglight are plug and play compatible with all HID & LED kits, Highbeams are LED only because of DRL unless disabled with VAGCOM (in which case CANBUS HID is also plug and play. Factory HID equipped Jettas use D3S 4300K bulbs and H11 halogen fogs which are compatible with all HID & LED kits.
2013 Volkswagen Jetta
2013 come with two headlight options, factory halogens and factory HID. Factory halogen Jettas use an H7 bulb for lowbeam, H7 bulb for highbeam and H8 bulb for fogs. The lowbeams and foglight are plug and play compatible with all HID & LED kits, Highbeams are LED only because of DRL unless disabled with VAGCOM (in which case CANBUS HID is also plug and play. Factory HID equipped Jettas use D3S 4300K or later 2013 builds and D1S bulbs for early 2013 builds. Foglight bulbs are H8 on some models and 9006 on others. Check the label on your factory bulb. Fogs are compatible with all HID & LED kits on all models.
2006 - 2012 Volkswagen Jetta
2006, 2007, 2008, 2009. 2010, 2011, and 2012 Jettas come with two headlight options, factory halogens and factory HID. Factory halogen Jettas use an H7 bulb for lowbeam, H7 bulb for highbeam and 9006 bulbs for fogs. The lowbeams and foglight are plug and play compatible with all HID & LED kits, Highbeams are LED only because of DRL unless disabled with VAGCOM (in which case CANBUS HID is also plug and play. Factory HID equipped Jettas use D2S 4300 and share the halogen models H7 & 9006, subject to the same restrictions as the halogen model.
1997 - 2005 Volkswagen Jetta
1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, and 2005 Jettas use a single 9007 bulb for combined Lowbeam and highbeam. Highbeam are not upgradeable to HID unless DRL is disabled in VAGCOM. Lowbeam HID kits include free 55w halogen bulb attached to HID hosing for plug and play DRL & Highbeam operation. Foglights are H3 and compatible with all upgrade kits. If you have a 1999 model with the rare 4 headlight system, contact us.
HID Kit Colour Guide
AbsoluteHID Recommends 4300K (White) Factory colour HID's for all applications. White HID's are brighter, less distracting to other drivers and offer maximum visibility. LED kits come ONLY in 6000K
AbsoluteHID Smart PWM CANBUS HID Kits
- Prevents vehicle ECU from detecting HID Kit
- CANBUS chip prevents "bulb out" or "replace low beam" light on dash*
- Digitally regulated ballasts extends bulb life (up to 4 years)
- Smart PWM HID kits have the fastest warm-up time (Achieve 80% brightness within 1 second)
- NO Flickering
- Standard brightness 35w & Max brightness 55w kits available
- Factory halogen bulbs are 55w
- Longest lasting lighting upgrade (up to 30000 hours)
- Unlike HID, no bulb replacement every 3500 hours
- No ballast to mount (easy install!)
- Thermal bands for maximum heat dissipation
- Brand name diodes
- Instant-on technology
AbsoluteHID Technical Specifications:
35w Smart PWM CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC CANBUS: Load Balancing .5ohm Rev 2.1a | Wattage (RMS): 35W Startup Amperage Draw: 4.7A Constant Amperage Draw: 3.5A Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~3650lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) Temperature Rating: -40°C - 105°C |
55w Smart PWM CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC Temperature Rating: -40°C - 105°C | Wattage (RMS): 55W Startup Amperage Draw: 5.6 Constant Amperage Draw: 4.5 Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~5100lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) |
4800 Lumen CANBUS LED KIT:
Component Design: CREE (Raleigh, NC, USA) Component Assembly: CREE (Guangzhou, China) Associated Ratings: E4, E11, ISO:9006, ISO:14001 Input Voltage: 11.7~24.9 VDC (Optimal 13.5VDC) Full brightness: Instant Operating Lifetime: 30000 Hours | Wattage (RMS): 80W (40w LED x2) Startup Amperage Draw: 3.2 @ 12v Constant Amperage Draw: 3.2 @ 12v Bulb Lumen Output: ~4800lm (@ 6000K) Reverse Polarity Protection: Yes |