CALL US! (647)547-1962 or (403) 713-0177
**FREE Shipping!**
AbsoluteHID is now offering free shipping on all purchases anywhere in Canada
1995 - 1996 Toyota Camry
1995 & 1996 Camrys have a 9006 bulb for lowbeam and 9005 bulb for highbeam All lights plug and play with all kits.
1997 - 1999 Toyota Camry
1997, 1998, and 1999 Camrys use a single H4 bulb for both low and high. Lowbeams are plug and play with HID. Highbeams are upgradeable only after disabling DRL. If you purchase just a lowbeam HID kit, you'll get a free highbeam halogen bulb attached to preserve plug and play Highbeam & DRL functionality.
2000 - 2001 Toyota Camry
2000 & 2001 Camrys have a 9006 bulb for lowbeam and 9005 bulb for highbeam. All lights plug and play with all kits. Recommended kit 55w HID.
2002 - 2006 Toyota Camry
2002, 2003, 2004, 2005, and 2006 Camrys have a 9006 bulb for lowbeam. 9005 bulb for highbeam, and a 9006 foglight bulb. All lights plug and play with all kits. Recommended kit 55w HID. Some 2006 models have factory installed D2S systems for lowbeam, but are otherwise identical.
2007 - 2020 Toyota Camry
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and 2020 Camrys have different headlights ut all use the same kits. Lowbeam use H11 bulbs, highbeams are 9005 and foglights are H11. Highbeam are not upgradeable to HID unless DRL is disabled prior to install. Highbeams are plug and play with LED and DRL compatible. Lowbeam and highbeam plug and play with all kits. Recommended kit 55w HID. Some 2013-2014 models equipped with D4S factory lowbeam HID, and share highbeam and foglight specifications with the normal models.
HID Kit Colour Guide
AbsoluteHID Recommends 4300K (White) Factory colour HID's for all applications. White HID's are brighter, less distracting to other drivers and offer maximum visibility. LED kits come ONLY in 6000K
AbsoluteHID Smart PWM CANBUS HID Kits
- Prevents vehicle ECU from detecting HID Kit
- CANBUS chip prevents "bulb out" or "replace low beam" light on dash*
- Digitally regulated ballasts extends bulb life (up to 4 years)
- Smart PWM HID kits have the fastest warm-up time (Achieve 80% brightness within 1 second)
- NO Flickering
- Standard brightness 35w & Max brightness 55w kits available
- Factory halogen bulbs are 55w
- Longest lasting lighting upgrade (up to 30000 hours)
- Unlike HID, no bulb replacement every 3500 hours
- No ballast to mount (easy install!)
- Thermal bands for maximum heat dissipation
- Brand name diodes
- Instant-on technology
AbsoluteHID Technical Specifications:
35w Smart PWM CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC CANBUS: Load Balancing .5ohm Rev 2.1a | Wattage (RMS): 35W Startup Amperage Draw: 4.7A Constant Amperage Draw: 3.5A Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~3650lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) Temperature Rating: -40°C - 105°C |
55w Smart PWM CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC Temperature Rating: -40°C - 105°C | Wattage (RMS): 55W Startup Amperage Draw: 5.6 Constant Amperage Draw: 4.5 Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~5100lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) |
4800 Lumen CANBUS LED KIT:
Component Design: CREE (Raleigh, NC, USA) Component Assembly: CREE (Guangzhou, China) Associated Ratings: E4, E11, ISO:9006, ISO:14001 Input Voltage: 11.7~24.9 VDC (Optimal 13.5VDC) Full brightness: Instant Operating Lifetime: 30000 Hours | Wattage (RMS): 80W (40w LED x2) Startup Amperage Draw: 3.2 @ 12v Constant Amperage Draw: 3.2 @ 12v Bulb Lumen Output: ~4800lm (@ 6000K) Reverse Polarity Protection: Yes |