2000 - 2004 Subaru Outback
2000, 2001, 2002, 2003 and 2004 Outbacks use H1 lowbeam bulb, 9005 highbeam bulb and a 9006 foglight bulb. Lowbeams and foglights are plug and play with all kits, highbeams are plug and play only with LED unless DRL is disabled prior to installation.
2005 - 2009 Subaru Outback
2005, 2006, 2007, 2008 and 2009 Outbacks use H7 lowbeam bulb, 9005 highbeam bulb and a 9006 foglight bulb. Lowbeams and foglights are plug and play with all kits, highbeams are plug and play only with LED unless DRL is disabled prior to installation.
2010 - 2014 Subaru Outback
2010, 2011, 2012, 2013 and 2014 Outbacks use H7 lowbeam bulb, 9005 highbeam bulb and a H11 foglight bulb. Lowbeams and foglights are plug and play with all kits, highbeams are plug and play only with LED unless DRL is disabled prior to installation.
2015 - 2019 Subaru Outback
2015, 2016, 2017, 2018 and 2019 Outbacks use H11 lowbeam bulb, 9005 highbeam bulb and a H16 foglight bulb. Lowbeams and foglights are plug and play with all kits, highbeams are plug and play only with LED unless DRL is disabled prior to installation. Models with steering adaptive foglights use H11 foglight bulbs. Some Outback models were factory equipped with D4S HID, replacement parts are available.
HID Kit Colour Guide
AbsoluteHID Recommends 4300K (White) Factory colour HID's for all applications. White HID's are brighter, less distracting to other drivers and offer maximum visibility. LED kits come ONLY in 6000K
AbsoluteHID Asic CANBUS HID Kits
- Prevents vehicle ECU from detecting HID Kit
- CANBUS chip prevents "bulb out" or "replace low beam" light on dash*
- Digitally regulated ballasts extends bulb life (up to 4 years)
- ASIC HID kits have the fastest warm-up time (Achieve 80% brightness within 1 second)
- NO Flickering
- Standard brightness 35w & Max brightness 55w kits available
- Factory halogen bulbs are 55w
- Longest lasting lighting upgrade (up to 30000 hours)
- Unlike HID, no bulb replacement every 3500 hours
- No ballast to mount (easy install!)
- Thermal bands for maximum heat dissipation
- Brand name diodes
- Instant-on technology
AbsoluteHID Technical Specifications:
35w ASIC CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC CANBUS: Load Balancing .5ohm Rev 2.1a | Wattage (RMS): 35W Startup Amperage Draw: 4.7A Constant Amperage Draw: 3.5A Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~3650lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) Temperature Rating: -40°C - 105°C |
55w ASIC CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC Temperature Rating: -40°C - 105°C | Wattage (RMS): 55W Startup Amperage Draw: 5.6 Constant Amperage Draw: 4.5 Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~5100lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) |
4800 Lumen CANBUS LED KIT:
Component Design: CREE (Raleigh, NC, USA) Component Assembly: CREE (Guangzhou, China) Associated Ratings: E4, E11, ISO:9006, ISO:14001 Input Voltage: 11.7~24.9 VDC (Optimal 13.5VDC) Full brightness: Instant Operating Lifetime: 30000 Hours | Wattage (RMS): 80W (40w LED x2) Startup Amperage Draw: 3.2 @ 12v Constant Amperage Draw: 3.2 @ 12v Bulb Lumen Output: ~4800lm (@ 6000K) Reverse Polarity Protection: Yes |
