2004 - 2006 Mazda 3
2004, 2005, and 2006 Mazda 3's have H7 lowbeam bulbs, 9005 highbeam bulbs and H11 fog light bulbs. All 3 housings are Plug and Play LED compatible, Lowbeams and Foglights are HID Plug and Play Compatible. Highbeams are HID compatible only after disabling DRL. Factory installed D2S HID's were also available, these vehicles had identical high and fogs to their halogen counterparts.
2007 - 2009 Mazda 3
2007, 2008, 2009 Mazda 3's have H7 lowbeam bulbs, 9005 highbeam bulbs and 9006 fog light bulbs. All 3 housings are Plug and Play LED compatible, Lowbeams and Foglights are HID Plug and Play Compatible. Highbeams are HID compatible only after disabling DRL. Factory installed D2S HID's were also available, these vehicles had identical high and fogs to their halogen counterparts.
2010 - 2013 Mazda 3
2010, 2011, 2012, and 2013 Mazda 3's have H7 lowbeam bulbs, 9005 highbeam bulbs and H11 fog light bulbs. All 3 housings are Plug and Play LED compatible, Lowbeams and Foglights are HID Plug and Play Compatible. Highbeams are HID compatible only after disabling DRL. Factory installed D2S HID's were also available which functioned as both low and high, these had fogs to their halogen counterparts.
2014 - 2016 Mazda 3
2014. 2015. and 2016 Mazda 3's have H11 lowbeam bulbs, 9005 highbeam bulbs and H11 fog light bulbs. All 3 housings are Plug and Play LED compatible, Lowbeams and Foglights are HID Plug and Play Compatible. Highbeams are HID compatible only after disabling DRL. Factory installed D4S HID's were also available which functioned as both low and high, these had fogs to their halogen counterparts.
2017 - 2019 Mazda 3
2017, 2018 and 2019 Mazda 3's have H11 lowbeam bulbs, 9005 highbeam bulbs non-upgradeable LED fogs. Low and highbeam are LED compatible, Lowbeams are HID Plug and Play Compatible. Highbeams are HID compatible only after disabling DRL. Factory installed LEDs were also available which have no upgradeable parts for any housing.
HID Kit Colour Guide
AbsoluteHID Recommends 4300K (White) Factory colour HID's for all applications. White HID's are brighter, less distracting to other drivers and offer maximum visibility. LED kits come ONLY in 6000K
AbsoluteHID Asic CANBUS HID Kits
- Prevents vehicle ECU from detecting HID Kit
- CANBUS chip prevents "bulb out" or "replace low beam" light on dash*
- Digitally regulated ballasts extends bulb life (up to 4 years)
- ASIC HID kits have the fastest warm-up time (Achieve 80% brightness within 1 second)
- NO Flickering
- Standard brightness 35w & Max brightness 55w kits available
- Factory halogen bulbs are 55w
- Longest lasting lighting upgrade (up to 30000 hours)
- Unlike HID, no bulb replacement every 3500 hours
- No ballast to mount (easy install!)
- Thermal bands for maximum heat dissipation
- Brand name diodes
- Instant-on technology
AbsoluteHID Technical Specifications:
35w ASIC CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC CANBUS: Load Balancing .5ohm Rev 2.1a | Wattage (RMS): 35W Startup Amperage Draw: 4.7A Constant Amperage Draw: 3.5A Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~3650lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) Temperature Rating: -40°C - 105°C |
55w ASIC CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC Temperature Rating: -40°C - 105°C | Wattage (RMS): 55W Startup Amperage Draw: 5.6 Constant Amperage Draw: 4.5 Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~5100lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) |
4800 Lumen CANBUS LED KIT:
Component Design: CREE (Raleigh, NC, USA) Component Assembly: CREE (Guangzhou, China) Associated Ratings: E4, E11, ISO:9006, ISO:14001 Input Voltage: 11.7~24.9 VDC (Optimal 13.5VDC) Full brightness: Instant Operating Lifetime: 30000 Hours | Wattage (RMS): 80W (40w LED x2) Startup Amperage Draw: 3.2 @ 12v Constant Amperage Draw: 3.2 @ 12v Bulb Lumen Output: ~4800lm (@ 6000K) Reverse Polarity Protection: Yes |
