2003 - 2010 Jeep Grand Cherokee
2003, 2004, 2005, 2006, 2007, 2008, 2009 and 2010 Jeep Grand Cherokees a 9006 lowbeam bulb, 9005 highbeam bulb and a 9145 / H10 foglight bulb. Lowbeam and foglights are plug and play with all kits. Highbeams are only plug and play with LED unless DRL is disabled prior to installation. Some models factory equipped with D1S OEM HID, these models had identical highs and fogs to their halogen counterparts.
2011 - 2013 Jeep Grand Cherokee
2011, 2012 and 2013 Jeep Grand Cherokees use a H11 low beam bulb, a 9005 highbeam bulb and a 2504 foglight bulb. Lowbeams are plug and play with all kits. Highbeams are only plug and play with LED unless DRL is disabled prior to installation. Foglights are plug and play with 35w HID and LED. 2504 housings cannot support 55w HID due to their small size. Some models factory equipped with D1S OEM HID, these models had identical highs and fogs to their halogen counterparts.
2014 - 2019 Jeep Grand Cherokee
2014. 2015, 2016, 2017, 2018 and 2019 Jeep Grand Cherokees a H11 lowbeam bulb, 9005 highbeam bulb and a H11 foglight bulb. Lowbeam and foglights are plug and play with all kits. Highbeams are only plug and play with LED unless DRL is disabled prior to installation. Some models factory equipped with D3S OEM HID, these models had identical highs and fogs to their halogen counterparts.
HID Kit Colour Guide
AbsoluteHID Recommends 4300K (White) Factory colour HID's for all applications. White HID's are brighter, less distracting to other drivers and offer maximum visibility. LED kits come ONLY in 6000K
AbsoluteHID Asic CANBUS HID Kits
- Prevents vehicle ECU from detecting HID Kit
- CANBUS chip prevents "bulb out" or "replace low beam" light on dash*
- Digitally regulated ballasts extends bulb life (up to 4 years)
- ASIC HID kits have the fastest warm-up time (Achieve 80% brightness within 1 second)
- NO Flickering
- Standard brightness 35w & Max brightness 55w kits available
- Factory halogen bulbs are 55w
- Longest lasting lighting upgrade (up to 30000 hours)
- Unlike HID, no bulb replacement every 3500 hours
- No ballast to mount (easy install!)
- Thermal bands for maximum heat dissipation
- Brand name diodes
- Instant-on technology
AbsoluteHID Technical Specifications:
35w ASIC CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC CANBUS: Load Balancing .5ohm Rev 2.1a | Wattage (RMS): 35W Startup Amperage Draw: 4.7A Constant Amperage Draw: 3.5A Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~3650lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) Temperature Rating: -40°C - 105°C |
55w ASIC CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC Temperature Rating: -40°C - 105°C | Wattage (RMS): 55W Startup Amperage Draw: 5.6 Constant Amperage Draw: 4.5 Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~5100lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) |
4800 Lumen CANBUS LED KIT:
Component Design: CREE (Raleigh, NC, USA) Component Assembly: CREE (Guangzhou, China) Associated Ratings: E4, E11, ISO:9006, ISO:14001 Input Voltage: 11.7~24.9 VDC (Optimal 13.5VDC) Full brightness: Instant Operating Lifetime: 30000 Hours | Wattage (RMS): 80W (40w LED x2) Startup Amperage Draw: 3.2 @ 12v Constant Amperage Draw: 3.2 @ 12v Bulb Lumen Output: ~4800lm (@ 6000K) Reverse Polarity Protection: Yes |
