1995 - 2003 Honda Civic
1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, and 2003 Civics use a single H4 bulb for both lowbeams and highbeam. A lowbeam LED kit will also upgrade highbeams for free and is plug & play. A lowbeam HID kit will come with a free halogen highbeam/DRL bulb attached to the same base and will be plug and play. Bi-xenon requires DRL disable on 1998+.
2004 - 2013 Honda Civic
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, and 2013 Civics use 9006 lowbeam bulbs, 9005 highbeams and h11 foglight bulbs (if equipped). Lowbeams and foglights compatible with all kits plug and play. Highbeams are plug and play with LED, but require DRL disable for HID's.
2014 - 2019 Honda Civic
2014, 2015, 2016, 2017, 2018 and 2019 Civics use H11 lowbeam bulbs, 9005 highbeams and h8 foglight bulbs (if equipped). Lowbeams and foglights compatible with all kits plug and play. Highbeams are plug and play with LED, but require DRL disable for HID's. 2016 and newer civics are available with factory installed LED low and highbeams. Only foglights are upgradeable on these models (LED recommended)
HID Kit Colour Guide
AbsoluteHID Recommends 4300K (White) Factory colour HID's for all applications. White HID's are brighter, less distracting to other drivers and offer maximum visibility. LED kits come ONLY in 6000K
AbsoluteHID Asic CANBUS HID Kits
- Prevents vehicle ECU from detecting HID Kit
- CANBUS chip prevents "bulb out" or "replace low beam" light on dash*
- Digitally regulated ballasts extends bulb life (up to 4 years)
- ASIC HID kits have the fastest warm-up time (Achieve 80% brightness within 1 second)
- NO Flickering
- Standard brightness 35w & Max brightness 55w kits available
- Factory halogen bulbs are 55w
- Longest lasting lighting upgrade (up to 30000 hours)
- Unlike HID, no bulb replacement every 3500 hours
- No ballast to mount (easy install!)
- Thermal bands for maximum heat dissipation
- Brand name diodes
- Instant-on technology
AbsoluteHID Technical Specifications:
35w ASIC CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC CANBUS: Load Balancing .5ohm Rev 2.1a | Wattage (RMS): 35W Startup Amperage Draw: 4.7A Constant Amperage Draw: 3.5A Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~3650lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) Temperature Rating: -40°C - 105°C |
55w ASIC CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC Temperature Rating: -40°C - 105°C | Wattage (RMS): 55W Startup Amperage Draw: 5.6 Constant Amperage Draw: 4.5 Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~5100lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) |
4800 Lumen CANBUS LED KIT:
Component Design: CREE (Raleigh, NC, USA) Component Assembly: CREE (Guangzhou, China) Associated Ratings: E4, E11, ISO:9006, ISO:14001 Input Voltage: 11.7~24.9 VDC (Optimal 13.5VDC) Full brightness: Instant Operating Lifetime: 30000 Hours | Wattage (RMS): 80W (40w LED x2) Startup Amperage Draw: 3.2 @ 12v Constant Amperage Draw: 3.2 @ 12v Bulb Lumen Output: ~4800lm (@ 6000K) Reverse Polarity Protection: Yes |
