CALL US! (647)547-1962 or (403) 713-0177
AbsoluteHID is now offering free shipping on all purchases anywhere in Canada. Our retail location is currently closed.
2000 - 2003 Chevrolet Impala
2000, 2001 and 2003 Impalas have 9006 lowbeam bulbs, 9005 highbeam bulbs and 896 foglight bulbs. All 3 housings are LED compatible, Lowbeams and Foglights are HID Compatible. Highbeams are HID compatible only after disabling DRL.
2004 - 2005 Chevrolet Impala
2004 and 2005 Impalas have 9006 lowbeam bulbs, 9005 highbeam bulbs and 893 foglight bulbs. All 3 housings are LED compatible, Lowbeams and Foglights are HID Compatible. Highbeams are HID compatible only after disabling DRL.
2006 - 2013 Chevrolet Impala
2006, 2007, 2008, 2009, 2010, 2011, 2012 and 2013 Impalas have H11 lowbeam bulbs, H9 highbeam bulbs and H11 foglight bulbs. All 3 housings are LED compatible, Lowbeams and Foglights are HID Compatible. Highbeams are HID compatible only after disabling DRL.
2014 - 2016 Chevrolet Impala
2014, 2015 and 2016 Impalas have a single 9012 bulb that does both low and highbeam. The highbeam operation is handled by the headlight, only a lowbeam kit needs to be purchased to upgrade both (select no to highbeam.) All kits are plug and play, but projector housings have the best possible beam pattern 55w HID. Some Impala models had factory installed D3S bulbs, if you have this type of vehicle and one of your headlights is out, you need replacement D3S bulbs.
2017 - 2020 Chevrolet Impala
2017, 2018, 2019 and 2020 Impalas have a single 9005 bulb that does both low and highbeam. The highbeam operation is handled by the headlight, only a lowbeam kit needs to be purchased to upgrade both (select no to highbeam.) All kits are plug and play, but projector housings have the best possible beam pattern 55w HID. Some Impala models had factory installed D3S bulbs, if you have this type of vehicle and one of your headlights is out, you need replacement D3S bulbs.
HID Kit Colour Guide
AbsoluteHID Smart PWM CANBUS HID Kits
AbsoluteHID Technical Specifications:
35w Smart PWM CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC CANBUS: Load Balancing .5ohm Rev 2.1a | Wattage (RMS): 35W Startup Amperage Draw: 4.7A Constant Amperage Draw: 3.5A Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~3650lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) Temperature Rating: -40°C - 105°C |
55w Smart PWM CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC Temperature Rating: -40°C - 105°C | Wattage (RMS): 55W Startup Amperage Draw: 5.6 Constant Amperage Draw: 4.5 Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~5100lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) |
4800 Lumen CANBUS LED KIT:
Component Design: CREE (Raleigh, NC, USA) Component Assembly: CREE (Guangzhou, China) Associated Ratings: E4, E11, ISO:9006, ISO:14001 Input Voltage: 11.7~24.9 VDC (Optimal 13.5VDC) Full brightness: Instant Operating Lifetime: 30000 Hours | Wattage (RMS): 80W (40w LED x2) Startup Amperage Draw: 3.2 @ 12v Constant Amperage Draw: 3.2 @ 12v Bulb Lumen Output: ~4800lm (@ 6000K) Reverse Polarity Protection: Yes |