1996 - 1998 Audi A4
1996, 1997 and 1998 A4s use H7 lowbeam bulbs, H7 highbeam bulbs and a H1 foglight bulb. Lowbeams and foglights are plug and play with all kits, highbeams are plug and play only with LED unless DRL is disabled prior to installation.
1999 - 2001 Audi A4
1996, 1997 and 1998 A4s use H7 lowbeam bulbs, H7 highbeam bulbs and a H7 foglight bulb. Lowbeams and foglights are plug and play with all kits, highbeams are plug and play only with LED unless DRL is disabled prior to installation. Factory HID models use D2S bulbs.
2002 - 2014 Audi A4
2002, 2003, 2004 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 one 2014 A4s use H7 lowbeam bulbs, H7 highbeam bulbs and a H7 foglight bulb. Lowbeams and foglights are plug and play with all kits, highbeams are plug and play only with LED unless DRL is disabled prior to installation. 2002 - 2008 factory HID models use D1S bulbs, 2009 - 2014 models use D3S bulbs.
2015 - 2019 Audi A4
2015, 2016, 2017, 2018 and 2019 A4s come with two possible headlight configurations. Factory LED models have non-upgradeable factory led lowbeam and highbeams, and a H7 foglight bulb which is compatible with all upgrade. Factory HID models for 2015 and 2016 use D3S, and 2017+ use D5S.
HID Kit Colour Guide
AbsoluteHID Recommends 4300K (White) Factory colour HID's for all applications. White HID's are brighter, less distracting to other drivers and offer maximum visibility. LED kits come ONLY in 6000K
AbsoluteHID Smart PWM CANBUS HID Kits
- Prevents vehicle ECU from detecting HID Kit
- CANBUS chip prevents "bulb out" or "replace low beam" light on dash*
- Digitally regulated ballasts extends bulb life (up to 4 years)
- Smart PWM HID kits have the fastest warm-up time (Achieve 80% brightness within 1 second)
- NO Flickering
- Standard brightness 35w & Max brightness 55w kits available
- Factory halogen bulbs are 55w
- Longest lasting lighting upgrade (up to 30000 hours)
- Unlike HID, no bulb replacement every 3500 hours
- No ballast to mount (easy install!)
- Thermal bands for maximum heat dissipation
- Brand name diodes
- Instant-on technology
AbsoluteHID Technical Specifications:
35w Smart PWM CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC CANBUS: Load Balancing .5ohm Rev 2.1a | Wattage (RMS): 35W Startup Amperage Draw: 4.7A Constant Amperage Draw: 3.5A Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~3650lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) Temperature Rating: -40°C - 105°C |
55w Smart PWM CANBUS HID KIT:
Component Origin: Germany Component Assembly: Guangzhou, China Bulb Assembly: Taipei, Taiwan Associated Ratings: E13, E11, ISO:9006 Input Voltage: 9~15.9 VDC (Optimal 13.5VDC) Output Voltage: 85 VAC Temperature Rating: -40°C - 105°C | Wattage (RMS): 55W Startup Amperage Draw: 5.6 Constant Amperage Draw: 4.5 Full brightness: 0.7 Seconds @ 10 °C, 1 bar. Bulb Lumen Output: ~5100lum (@ 4300K) Reverse Polarity Protection: Yes, MOSFET (internal) |
4800 Lumen CANBUS LED KIT:
Component Design: CREE (Raleigh, NC, USA) Component Assembly: CREE (Guangzhou, China) Associated Ratings: E4, E11, ISO:9006, ISO:14001 Input Voltage: 11.7~24.9 VDC (Optimal 13.5VDC) Full brightness: Instant Operating Lifetime: 30000 Hours | Wattage (RMS): 80W (40w LED x2) Startup Amperage Draw: 3.2 @ 12v Constant Amperage Draw: 3.2 @ 12v Bulb Lumen Output: ~4800lm (@ 6000K) Reverse Polarity Protection: Yes |